CarPal App Installation Guide

  1. Plug your CarPAL device into the socket located under the steering wheel or near the cigarette lighter of your vehicle and turn on the ignition.

    Make sure the device lights are on.

  2. Enable Bluetooth on your smartphone.

  3. When your phone detects the CarPAL Connect Bluetooth device named “OBDII”, select it to connect.

  4. If a password is requested, use 1234 or 0000.

  5. Once pairing is completed, launch the CarPAL application.

  6. To connect to your vehicle, enter the license code provided to you:

    • On the map screen, select a service point

    • Tap the “Check” button

    • Enter your license key

  7. Close the application and reopen it.

  8. After completing registration, start your vehicle.

  9. CarPAL will automatically connect to your vehicle.

    You can observe changes in kilometer (km) and RPM values on the home screen once the engine is running.

OBD2 Device Plugin

_____________________________________

CarPAL Wi-Fi Device Pairing Instructions

  1. Plug your CarPAL Connect Wi-Fi device into the socket located under the steering wheel or next to the cigarette lighter and turn on the ignition.

    Make sure the device lights are on.

  2. Enable Wi-Fi on your smartphone.

  3. When your phone detects the CarPAL Connect device named “WIFI_OBDII”, select it to connect.

  4. If a password is requested, use 1234 or 0000.

  5. On your iPhone, go to Settings → Wi-Fi.

  6. Select the WiFi-OBDII connection.

  7. Tap “Configure IP”.

  8. Select “Manual”.

  9. Enter the following values in the Manual IP section:

    • IP Address: 192.168.0.20

    • Subnet Mask: 255.255.0.0

    • Router: 192.168.0.10

  10. Tap “Save” to close the screen.

    This allows your phone to stay connected to the internet while connecting to the WIFI_OBDII device in the background.

  11. Once pairing is completed, open the CarPAL application.

    If it is already open, close it and reopen it.

  12. To connect to your vehicle, enter the license code provided to you:

    • Select a service point from the map

    • Tap the “Check” button

    • Enter your license key

  13. Close the application and reopen it.

  14. After completing registration, start your vehicle.

    (If you encounter issues during registration, turn off Wi-Fi and try again.)

  15. The CarPAL App will automatically connect to your vehicle.

    You can observe changes in kilometer (km) and RPM values on the home screen once the engine is running.